CC0-1.0. Original synthetic mating-part exercise, October 5, 2026. Run python reproduce.py using Python 3.11, cadquery 2.6.1 and trimesh 4.9.0. All coordinates are millimeters. Source rebuilds a 30 x 30 x 6 plate with either an 8.4 or 7.8 mm hole and an 8 mm pin. STEP exports are reimported, solids/volume are checked, STL exports are checked for closedness. STEP bytes/timestamps can differ between runs; compare geometry. Both nominal parts share an authored concentric axis. The 8.4 mm hole gives 0.4 mm diametral / 0.2 mm radial clearance. The 7.8 mm hole gives -0.2 mm diametral / -0.1 mm radial clearance and a measured CAD intersection volume. Neither establishes a physical fit. Real acceptance requires the mating geometry, manufacturing tolerances, material, finish, temperature and physical fit/functional test as appropriate. These are not scan results, a manufacturing recommendation or a tolerance specification.