3D Scanner Match: same native extension, different editable history CC0 1.0 - original synthetic fixtures and code, not scanner measurements. Checked on October 14, 2026 in Windows FreeCADCmd 1.1.4, Python 3.11.14, OCCT 7.8.1. The application binary is not included; FreeCAD has its own license. Inputs: two .FCStd projects with the same authored 80 x 50 x 6 mm plate and central 5 mm hole. The plate bounds are X=-40..40, Y=-25..25, Z=0..6. The hole axis is global Z at X=Y=0. The geometry-only project contains one Part::Feature. The other contains fully constrained sketches and Pad/Pocket dependencies. No scan or imported STEP was reconstructed. Eight actual background checks are in file-check.json and file-check.csv. We reopened a byte-identical geometry-only native project as a fresh document. Its solid remained valid and geometrically matched the parametric input, but HoleProfile and its named HoleDiameter constraint were absent. The attempted named-parameter edit was EXPECTED_UNAVAILABLE, not a geometry failure. We then subtracted a 7 mm cylinder as a new direct operation, exported STEP and checked its reimport. The parametric project separately rebuilt after changing the named parameter from 5 to 7 mm. The edited solids had zero symmetric-difference volume in the same OCCT kernel. Saved native inputs remain at 5 mm; edits happened in memory. This does not establish GUI usability, physical accuracy, capture quality, independent-kernel validity or compatibility with another CAD application. A new direct geometric edit does not recover the original feature history. Some history-free solids are editable; accept the specific task you need. Verify SHA256SUMS.txt against the seven other files before use. Archive hash and size are in the website's complete download manifest. New native UUIDs/timestamps or STEP timestamps can change reproduced byte hashes. Do not save over your originals; keep an untouched copy before editing. Reproduce with FreeCADCmd from your own installed official FreeCAD build. Set SCANNER_HISTORY_INPUT to the supplied plate-with-parameters-5mm.FCStd, SCANNER_HISTORY_OUTPUT to a new directory that does not already exist, then run FreeCADCmd.exe reproduce.py. The script refuses an existing output directory and creates a retained byte-identical reopen input in that new directory. In PowerShell, for example (replace the application path): $env:SCANNER_HISTORY_INPUT=(Resolve-Path './plate-with-parameters-5mm.FCStd').Path $env:SCANNER_HISTORY_OUTPUT=Join-Path (Get-Location) 'new-history-run' & 'C:/path/to/FreeCADCmd.exe' './reproduce.py' For your own supplier delivery, record the actual CAD application/version, body validity, exact named parameter or direct edit requested, before/after dimensions, dependencies and rebuild failures. A native file extension alone is not an acceptance test for the required editing task.