3D Scanner Match: same native extension, different editable history
CC0 1.0 - original synthetic fixtures and code, not scanner measurements.
Checked on October 14, 2026 in Windows FreeCADCmd 1.1.4, Python 3.11.14,
OCCT 7.8.1. The application binary is not included; FreeCAD has its own license.

Inputs: two .FCStd projects with the same authored 80 x 50 x 6 mm plate
and central 5 mm hole. The plate bounds are X=-40..40, Y=-25..25, Z=0..6.
The hole axis is global Z at X=Y=0. The geometry-only project contains
one Part::Feature. The other contains fully constrained sketches and
Pad/Pocket dependencies. No scan or imported STEP was reconstructed.

Eight actual background checks are in file-check.json and file-check.csv.
We reopened a byte-identical geometry-only native project as a fresh
document. Its solid remained valid and geometrically matched the parametric
input, but HoleProfile and its named HoleDiameter constraint were absent.
The attempted named-parameter edit was EXPECTED_UNAVAILABLE, not a geometry
failure. We then subtracted a 7 mm cylinder as a new direct operation,
exported STEP and checked its reimport. The parametric project separately
rebuilt after changing the named parameter from 5 to 7 mm. The edited
solids had zero symmetric-difference volume in the same OCCT kernel.
Saved native inputs remain at 5 mm; edits happened in memory.

This does not establish GUI usability, physical accuracy, capture quality,
independent-kernel validity or compatibility with another CAD application.
A new direct geometric edit does not recover the original feature history.
Some history-free solids are editable; accept the specific task you need.

Verify SHA256SUMS.txt against the seven other files before use. Archive
hash and size are in the website's complete download manifest. New native
UUIDs/timestamps or STEP timestamps can change reproduced byte hashes.
Do not save over your originals; keep an untouched copy before editing.

Reproduce with FreeCADCmd from your own installed official FreeCAD build.
Set SCANNER_HISTORY_INPUT to the supplied plate-with-parameters-5mm.FCStd,
SCANNER_HISTORY_OUTPUT to a new directory that does not already exist,
then run FreeCADCmd.exe reproduce.py. The script refuses an existing output
directory and creates a retained byte-identical reopen input in that new
directory. In PowerShell, for example (replace the application path):

$env:SCANNER_HISTORY_INPUT=(Resolve-Path './plate-with-parameters-5mm.FCStd').Path
$env:SCANNER_HISTORY_OUTPUT=Join-Path (Get-Location) 'new-history-run'
& 'C:/path/to/FreeCADCmd.exe' './reproduce.py'

For your own supplier delivery, record the actual CAD application/version,
body validity, exact named parameter or direct edit requested, before/after
dimensions, dependencies and rebuild failures. A native file extension
alone is not an acceptance test for the required editing task.
