EDIT A SOLID OR REBUILD ITS NATIVE PARAMETERS? This original synthetic plate is 80 x 50 x 6 mm. Its corner radius is 4 mm. The two original holes are 8 mm in diameter, on centers 50 mm apart. These files are not scans and do not demonstrate scanner accuracy. 1. Mesh reference: import plate-native-8mm.stl as millimeters. It contains triangles, not the source operations. 2. Direct solid edit: plate-native-8mm.step was actually imported into CadQuery 2.6.1. A new 5 mm through-hole was cut in its center and exported as plate-direct-edit-5mm.step. This tests that specific direct-edit task. 3. Native parameter rebuild: reproduce.py contains the original operation sequence. It was rebuilt with both original hole diameters changed from 8 to 10 mm, producing plate-rebuilt-10mm.step and .stl. STEP does not preserve that Python source history. Run reproduce.py with Python 3.11, cadquery==2.6.1 and trimesh==4.9.0. Run verify-step-reader.mjs with Node and occt-import-js==0.0.23 for the second STEP reader path. Both STEP paths use OCCT internally; they are not independent geometry kernels. The trimesh STL path measures bounds and closed mesh topology separately. Actual versions, measurements and SHA-256 values are in file-check.json. The CSV summarizes the Python reader checks. STEP timestamps can change on regeneration, so compare dimensions and geometry rather than hashes of regenerated files. Current hashes identify the files distributed here. If your deliverable requires Fusion, SOLIDWORKS, FreeCAD or another native project, test the required edit in that application with its exact version. This exercise does not claim compatibility or history reconstruction there. No scan-to-solid reconstruction, physical part or hardware test was done. LICENSE: CC0-1.0. These original source and fixture files are dedicated to the public domain by 3D Scanner Match. https://creativecommons.org/publicdomain/zero/1.0/ Software documentation: https://cadquery.readthedocs.io/en/stable/importexport.html https://github.com/kovacsv/occt-import-js