3D Scanner Match - surface demonstration record This blank CSV is an original planning template, not a scanner test result. Open it in a spreadsheet and complete it with your supplier or demo operator. Use one copy per scanner candidate. Keep the part, required output and acceptance rule the same. Attach both raw and processed files where available. A: Capture an untreated baseline: no coating, but retain markers required by the selected mode. Record mode, exposure preset, distance, lighting, marker layout, operator, capture path, alignment and processing settings. Keep raw gaps and failures. Untreated does not mean marker-free. B: Compare owner-approved preparation with A under the same controlled setup. Change only the surface preparation; record the product, application, elapsed time and removal. Retain the same required marker layout. If mode, settings or processing also change, label A/B confounded and repeat a matched pair before attributing a difference to preparation. Keep the same automatic exposure preset and record its observed behavior where applicable. If coating is prohibited, omit B rather than use unauthorized preparation. C: Validate the selected permitted process in the actual production work area. Record changes in lighting, access, operator handling and environment and identify each repeat capture. This is a separate production validation, not a preparation-only comparison. Use the same output and acceptance rule. A marker-free diagnostic is optional only if the manual supports it. A mode that needs markers is not required to pass an impossible marker-free test. An unavailable or failed untreated baseline remains a limitation; do not replace it with an invented result. Define the acceptance rule before the demo. A filled hole is not a captured surface. An unsuitable reference measurement makes the result inconclusive, not a pass. The template does not determine calibration or measurement uncertainty and does not replace the scanner manual or a spray safety sheet. Amounts, tolerances, prices and actual measurements are intentionally blank. Do not insert sensitive supplier data into a public copy. Downloads do not send your completed records to this website. Context: https://3dscannermatch.com/guides/scanning-reflective-dark-surfaces/ Template revision: 2026-10-01 License: CC0-1.0. Original 3D Scanner Match planning resource.